Skip navigation
Go to Global Navigation
Go to Primary Contents
Go to Site Information

Yokogawa Denshikiki Co., Ltd.

ydk

Gyrocompass

CMZ900D

Features a highly reliable dual system configuration.

CMZ900D

特長

  • The system configuration can easily be adapted to each vessel's specifications.
  • IEC 61162-2 high-speed code is available for the heading and rate of turn (ROT) outputs.
  • A unique anti-vibration system enhanced by the velocity damping effect of high viscous oil, provides superior damping of vibration and decoupling of shock at sea.
  • A small and lightweight container enhances the follow up speed. The gyrocompass changes smoothly and does not lag when a small vessel rapidly changes course.
  • A space-saving design: the master compass and the control box can be installed on the autopilot stand.
  • Automatic speed error correction is possible if both the ship's speed signal from the speed log and the latitude signal from a GPS or some other positioning device is available. Further, the latitude can be estimated from the ship's speed and the gyrocompass reading if the positioning device signal is absent.
  • An external heading signal from an instrument such as a magnetic compass or a GPS compass can be passed to repeater compasses and other ship equipment for back-up purposes.
  • Mechanical switchover as well as switchover by software control, is available to select which master compass can be used for the purpose of reliability on the switch action.
  • As a standard function, a built-in monitor detects deviations between the master compass and external sensor heading readings.
  • The restart time can be preset from 1 to 99 hours.
  • Bridge Alert Management System (BAMS) interface function based on IEC62288 Ed.2.
Gyrocompasses
CMZ900D System Descriptions

仕様

Settling Time
and Accuracy
Settling time Within 5 hours
(Operational state is reached in about 2 hours)
Accuracy Static: ±0.25 deg.x sec (Latitude)
Dynamic: ±0.7 deg.x sec (Latitude)
Follow up accuracy 0.1 deg. or less
Max. follow up speed 30 deg./s

Environmental
(Normal use)

Permissible angle ±40 deg.(Roll), ±40 deg. (Pitch)
Ambient temperature -10 deg.C to +55 deg.C
Power Supply Main 100V/110V/115V/220V AC 50/60Hz single-phase
24V DC (For back up power)
Alarm 24 V DC
Signal Inputs Automatic
speed error correction
Latitude: IEC61162-1 (NMEA0183) 1 circuit
Ship's speed: 200 P/nm or IEC61162-1
(NMEA0183)
1 circuit
Alarm IEC61162-1 (NMEA0183) 1 circuit
Signal Outputs Heading data for repeater compasses 8 circuits
Heading data for steppers 4 circuits
Serial data IEC61162-1 1 circuit
IEC61162-1/-2 selective 2 circuits
Analog heading data Heading signal 1 circuit
Quadrant signal 1 circuit
Turn rate signal 3 circuits
Gyro. running (Close contact when running) No.1/No.2
1 circuit ea.
Alarms (Open contact
when abnormal)
System failure 1 circuit
Master compass failure No.1/No.2
1 circuit ea.
No voltage No.1/No.2
1 circuit ea.
Heading deviation signal (Close contact when excessive) 1 circuit
Type Approval Japan(JG)
EU(MED:Wheelmark)
China(CCS)
Gyrocompasses
CMZ900D System Descriptions

Inquiry

Service and Maintenance Inquiries
For inquiries on consumable and service parts, consultations about repair and inspection, or questions about using our products, please click on the following:

Go to customer support

Product Inquiries
For consultations about our products and requests for catalogs or quotations, please click on the following:

Go to customer support